There should be a small screw on the back side of the glove box casing.
(near the swiveling latch piece); this holds the guts (& trim ring) to the
casing that is attached to the door itself.
The headlight switch knob comes out by pressing a small button at the end of
the switch (under the dash at the end of the switch nearest the front of the
truck); hold it in while pulling the knob & stem all the way out of the
switch. Then just unscrew the front piece of the switch & remove from
underneath dash. Disconnect battery 1st, the switch feed is hot even with
the key off.
Regards,
Doug Pewterbaugh
dpewter@msn.com
Denton, TX
49 3104 216 5-window
----- Original Message -----
From: "Ric McAnulty" <ric_mcanulty@yahoo.com>
To: "oletrucks" <oletrucks@autox.team.net>
Sent: Monday, May 13, 2002 1:57 PM
Subject: [oletrucks] Removal Help
> Finally back to working on the '50 3100, about ready to hit the paint
shop, but have a couple stickey removal isues. Does anyone know how to
remove the lock for the glove box? Can't seem to find anything holding it
in onthe back side, only the chrome cover on fornt. I want to get a new key
made and also have it out during painting. Also the headlight switch. Seems
like it has a lockdown nut on the back side, but how does the actual pull
knob come off so that it will pass back through the dash? is it threaded n
or does it just pull off ??
>
> Thanks to all , I get a lot of great information from the 'masters' .
>
> Ric McAnulty
>
> ' 50 3100 5-Window Custom Cab
>
> with ' 56 235-6 4-speed
> LAUNCH - Your Yahoo! Music Experience
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|