I actually am doing about the same thing, except my engine is a 5.3L Vortec
(LS-1) TPI from a 2000 Silverado. I did a lot of research and found that
Street and Performance (www.hotrodlane.cc) makes a great plug in harness to
adapt these new engines to older vehicles, they are pricey though (my
harness is ~$800.00), then you also need to reprogram the computer. For the
88 TPI engines, I think Painless Wiring also makes a harness. You may want
to look around. This is not a cheap option, but I think it will produce a
very nice running and looking vehicle.
Dave
57 3100
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of laurie
Sent: Wednesday, April 24, 2002 4:09 PM
To: oletrucks@autox.team.net
Subject: [oletrucks] tuned port injection
has anyone put tuned port on there old trucks?
i have a 55 second and i have a tpi system from a 88 firebird
it has a 350 with a 400 tranny i need to buy a carb anyway so i thought this
would be just as cheep and look different too
any ideas on wiring?
or any other helpful info or pros/cons
thanks
mike
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|