I use both.
Electric sander and air powered DA orbital sander. Electric for knocking it
down fast, and the DA for finer work.
I also use an air long board sander and hand wooden ones and paint sticks
wrapped with wet dry paper and.......
Jon C. Peters
-----Original Message-----
From: Eric [mailto:ej-pj-dj@pacbell.net]
Sent: Wednesday, February 20, 2002 4:19 PM
To: oletrucks@autox.team.net
Subject: [oletrucks] Sander, air or electric
I want to start sanding on my truck and was wondering what
kind of
sander I should use. The body is good, the paint is still
there but
looks like someone puked all over it from the rust
inhibitors that i
have used. So all I want to do is sand and prep ffor fresh
paint. I have
plenty of air and elec. I just dont have alot of experience
with air
sanders so I dont know which is better. Whats everbody using
air or
electric. TIA.
Eric 48 sub
oletrucks is devoted to Chevy and GM trucks built between
1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|