How many bolts hold the rearend cover on?
Does it have wide coil pads on it?
Does it have a provision for a torque arm?
The only 3.27 ratio rear I know of is the BorgWarner 9-bolt )has 9 bolts
holding the diff cover on and also the ring gear on) from the mid to late
80's F-Bodies.
> [Original Message]
> From: steven stuckmeyer <slstu@msn.com>
> To: oletruck <oletrucks@autox.team.net>
> Date: 1/10/02 7:04:33 PM
> Subject: Re: [oletrucks] Late? model rear end number help
>
> If it's a Chevy, you might find it in a book "Chevrolet by the Numbers".
> There are a few for different years but I find all the info I wanted from
the
> book for a rear end I picked up. Found it at the local Library.
> Steve
> 51 3100
> St Peters, MO
>
> ----- Original Message -----
> From: CHANDNE@aol.com
> Sent: Thursday, January 10, 2002 2:06 PM
> To: oletrucks@autox.team.net
> Subject: [oletrucks] Late? model rear end number help
>
> Have a tag off a late(?) model rear-end that I found, dont know what it is
> out of but there was a tag on the pumpkin cover P\N 10032245 , ratio
3:27
> serial number 4962 . Anyone have a way of knowing where this thing came
> from or out of? No other numbers on the axle. Thanx for any and all help.
> neal
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
--- Mike
--- passnb4u@earthlink.net
--- EarthLink: The #1 provider of the Real Internet.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|