I have a 235 in my '51 Chevy and put in a 12 volt alternator. I was getting
ready to make some brackets and found that the aftermarket chrome 350 Chevy
brackets at Autozone work great. I ovaled the forward mount hole on the lower
bracket and it mounted in the original holes and lined up with the pulleys. I
cut off about 4"-6" from the top bracket drilled a hole/cut a spacer to match
and off to Napa for a belt. Works great and chrome too, it matches the only
other chrome piece on the engine; the coil bracket...someday.
----- Original Message -----
From: Ronald I. Givens
Sent: Sunday, November 25, 2001 12:18 PM
To: oletrucks
Subject: [oletrucks] bracket for alt.
Hiowdy,
Does anyone know where I can buy a pre-fab alt. bracket...
The one on the 51 gmc 248 does not line up properly and wears the belt...
Thanks for any info
ron givens
houston, texas
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|