Does anyone know of a source for the trim piece that Joe is describing on
the attachment. I have looked in Chevy Duty and Carteres catalogs and
cannot find this?
Thanks
"joe"
<chevy1@jps.net> To:
<CHARLES_A._CLARK@HUD.GOV>,
Sent by: <oletrucks@autox.team.net>
owner-oletrucks@auto cc:
x.team.net Subject: Re: [oletrucks]
door window
opening trim
11/21/01 09:50 AM
Please respond to
"joe"
That outer trim around the door opening is held on with 1 little clutch tip
screw about in the center and up at an angle.....where the glass
weather-strip goes! The screw holds the two halves of the trim together
and is across from where the overlap bump is on the outer trim at the top.
Joe
-----Original Message-----
From: CHARLES_A._CLARK@HUD.GOV <CHARLES_A._CLARK@HUD.GOV>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Wednesday, November 21, 2001 6:18 AM
Subject: [oletrucks] door window opening trim
>I bought a used door and received it yesterday but it lacks something.
The
>existing door has what appears to be a trim ring (metal, not chrome or ss)
>around the outside of the window opening that appears to be spot welded
in.
>The new (old) door does not have this ring but the opening does not look
>like it was damaged in anyway such as would be the case if something was
>spot welded to it and was removed.
>
>Is that trim aroung the window actually spotwelded or is it screwed in? I
>cannot see any tell tale signs of srews or other type of fastener other
>than a spot weld on the existing door.
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|