I put mine on the inside of the passenger side frame rail, just behind
the trans crossmember.
Ran the lines from the master along the crossmember to the valve. The
rear line just hooks up from where it was. The front lines run forward
with the drivers front running back across the front crossmember under
the radiator.
That follows the course and mounts of the original lines pretty well.
Lee Glenn wrote:
>
> Hey.
>
> All you guys who have installed a proportioning valve in your disk/drum brake
> systems, where'd you put it?
>
> Pix would be cool.
>
> A big thanks,
> -Lee
> '49 3600
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
--
John Dorsey
Wauchula FL
http://www.strato.net/~jrdorsey
'49 3800 Chevy Panel
'52 640 GMC Firetruck
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|