Antonio -
Did you also install the new filler neck seal on the cab? Is so, you can
rotate the seal and that will change the filler neck tube angle to line up
with the tank connections.
Joe
-----Original Message-----
From: Antonio R. Tijerino <antonio@innercite.com>
To: oletrucks <oletrucks@autox.team.net>
Date: Thursday, July 12, 2001 9:18 PM
Subject: [oletrucks] Gas tank filler neck.
>I put the gas tank back in the cab of my '53 truck and installed the gas
>filler neck, but now I can't get the gas tank connector to align with the
>gas filler neck. I ordered the connecting hoses from Chevy Duty, they seem
a
>little short, but that is not the problem, the problem is that the filler
>neck is not lining up with the two hose connectors from the gas tank.
>Any ideas?
>
>Thanks,
>
>Antonio,
>'53 3100
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|