The 9" rear that my Nova buddies use is the one from first generation
Broncos, from what I have been told, width is near perfect.
Al
49/54 Rod project
----- Original Message -----
From: "Stephanie" <stephanie@annexe.cwnet.com>
To: <oletrucks@autox.team.net>
Sent: Monday, May 07, 2001 4:55 PM
Subject: [oletrucks] Ford 9" rearend
> I guess I'm looking for a Ford 9" rearend with the smaller bolt spacing
(4"
> something, not 5"), with the right width (about 60")...and these only came
> in rare mustangs, cougars, etc. with big blocks (or it'd have 8")...this
is
> going to be tuff to find (or expensive).
>
> -----Original Message-----
> From: owner-oletrucks@autox.team.net
> [mailto:owner-oletrucks@autox.team.net]On Behalf Of Al&Judy
> Sent: Monday, May 07, 2001 10:52 AM
> To: oletrucks@autox.team.net
> Subject: Re: [oletrucks] Rearend sizing
>
>
> Oletruckers, for all the info you could ever want on Nova/Ventura etc.
rear
> ends, check out
> www.geocities.com/MotorCity/Speedway/6432/ , widths, ratios, codes, it is
> all there under axle codes.
>
> Al
> 49/54 Rod project
> ----- Original Message -----
> From: <Pastorjon994@cs.com>
> To: <jacobh@ida.net>; <oletrucks@autox.team.net>
> Sent: Monday, May 07, 2001 12:12 PM
> Subject: Re: [oletrucks] Rearend sizing
>
>
> > <So, if you are looking for a replacement that will not need any
changes,
> > check out the Ventura.>
> >
> > Say Jack, do you remember what the ratio is on the 74 Ventura?
> >
> > Jon Callahan
> > '50 3100
> > Champaign/Urbana, IL
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|