Very carefully
Get two pieces of flat bar about three inches long wrap friction tape around
both ends of both bars,about 4 wraps each put the bars on each side of the
glass, get a pair of vise grips clamp them to the bars and start working the
glass very slowly pulling outward with one hand and using a small
screwdriver working the tip in the top and bottom of the glass and channel,
that's where you have to be carefully because you can break the glass if you
put to much pressure on the glass.
Good luck it worked for me and that's the way we did it in the 50's.
HooT58
----- OriginalMessage -----
From: "Stephanie" <stephanie@annexe.cwnet.com>
To: <oletrucks@autox.team.net>
Sent: Tuesday, May 01, 2001 8:30 PM
Subject: [oletrucks] removing vent window glass
> how do you remove the vent window glass from the frame?
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|