If you look on this page http://www.beynon.net/pages/buildup.htm at the last
picture you'll see a Lokar shifter with the linkage bent away from the
master cylinder. Also note for the reservoir to clear the transmission
support we had to cut the support, turn it slightly and weld it backup. The
can of brake fluid sitting on the transmission is not an integral part of
the install.
Terry Beynon
55-1 3100
51 Suburban
www.beynon.net/terry.html
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of ChevTruk53@aol.com
Sent: Sunday, April 29, 2001 10:07 PM
To: oletrucks@autox.team.net
Subject: [oletrucks] Brake and Trans linkage problem
I put a 350 combo in my 53 3100 and have a Caddilac steering column, a brake
booster master cylinder mounted under the floor. My problem is if I use one
of those "universal" linkages from Lokar I will not be able to use my brakes
as the pedal will hit the linkage. I have pulled my hair out trying to
think
of a way to fix it but cant. Any help or input will be appreciated.
Zach
53 3100 rod in (slow) progress
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|