No that bell housing won't bolt up on it's own. If your really wanting to
use the 235 bellhousing how about using one of those adapter I've seen at
Stovebolt or was that Inliners?.......Anyway it allows the conversion to a
newer automatic i.e. from a 6 cylinder but I would imagine you could use it
the other way?
I'm looking at an article for matching up bellhousing to flywheels and
starters if you happen to need any information. I should probably just add
it to my website for future reference.
Joe
-----Original Message-----
From: Bobby D Keeland <bob_keeland@usgs.gov>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Monday, April 23, 2001 8:02 AM
Subject: [oletrucks] 235 bellhousing to 283
>Does anyone know if a 235 bellhousing will bolt to a 283 engine? I have
>the 283 and have an opportunity to get a 3 speed tranny with bellhousing
>and clutch from a 235.
>
>BobK
>51 3600 5-window (project)
>89 F150
>98 RAM (hers)
>99 HD Sportster
>Arnaudville, LA
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|