Tom,
Off the top of my head I think that I'm running either the 5/16 or 3/8 lines
for the transmission cooler lines and a 1/4 line for the vacuum modulator.
You basically want to get a hard line close to the end pipe on the modulator
so you can just use a small length of vacuum hose to connect the hard line
to the modulator and the same for the opposite end on the engine.
Joe
-----Original Message-----
From: Tom <tomntam@earthlink.net>
To: Oletrucks <oletrucks@autox.team.net>
Date: Saturday, April 21, 2001 10:14 AM
Subject: [oletrucks] another TH 359 question
>Is 5/16ths line ok for the cooling lines and what size line is sufficient
>for the modulator valve?
> thanks tom
>
>1997 -2000 Racing Seasons http://home.earthlink.net/~tomntam/index.html
>Don't crush ', rebuild them!
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|