Just rebuilt my hinged got the pins and bushings and instructions from
Chevy duty, all you need is a punch and hammer and vise very easy to do
unless one of your bottom hinges are rusted up the you might need a press
I was successful 3 out of four, one bottom the pin was broke and it was
rust welded so I got another one at a junk yard and rebuilt it.
Good luck
HooT58
----- Original Message -----
From: Steve Andereggen Jr. <anderegs@e-machines.net>
To: <oletrucks-digest@autox.team.net>
Sent: Friday, January 05, 2001 12:14 AM
Subject: [oletrucks] AD door hinges
> Hi guys....I'm in the putting together stage of my truck and need to get
> my hinges rebuilt. I know where to get the parts and Golden State does
> sell rebuilt hinges but $90 each is a bit too much for me. Does anyone
> know of another source to do this and how much. I don't have the
> propper tools to try it myself.
>
> Another question that I have is of a Trico 12V vacuum pump that I picked
> up used to power vacuum windshield wiper motor. Yes it is original.
> What I need is info on how to hook it up and any info on how it works.
> It is powered by what looks like a heater motor hooked up to a Trico
> vacuum pump with what seems to be a vacuum pressure switch? to start,
> stop the motor. Any help would be appreciated.
>
> I also have lots of parts to get rid of including a 1952? 1 ton complete
> panel truck, have pictures, $300.00. Yes that price is correct. I also
> have two 1954 beds in great shape, no rust outs and little dings.
>
> Thanks for all your help
> Steve Jr.
> 1950 3100 pu
> 1959 3200 fleetside pu
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|