NM Jim, after the epoxy sets up for a day or two......what then? Can it be
sanded down to blend in with the wheel? And how about painting the steering
wheel.....special paint needed....or will any paint do? Thanks for the
help!
Tom Caperton
47-2nd 3100....in Whiteville, NC
----- Original Message -----
From: New Mexico Jim <ADvent@thuntek.net>
Cc: <oletrucks@autox.team.net>
Sent: Monday, July 10, 2000 12:25 PM
Subject: Re: [oletrucks] Steering wheel gunk
> That stuff is a rip-off. Get some epoxy from Home Depot or similar place.
Use a
> hacksaw blade only (no blade holder) and cut down to the steel core all
around.
> Make the cut wide enough to force the epoxy into the new cut. Let it set
for a
> day or two in a humid environment.
>
> Thom Laybourne wrote:
>
> > Old plastic does that. Contact Banjo steering wheels, don't know their
web
> > address, they have covers and epoxy to solve this problem.
> >
> > thom
> >
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|