Do you have a inline filter or one in the carb?
If you have one in the carb take it out just use the inline
It happen to me one time?
HooT58
----- Original Message -----
From: <Mikerross@aol.com>
To: <oletrucks@autox.team.net>
Sent: Thursday, July 06, 2000 9:50 PM
Subject: [oletrucks] Engine Stalling Problem
> Guys I installed a Chevy 305 in my 56 truck. I installed a rebuilt
> carbuerator. I only have about 10 miles on the rebuilt engine/truck.
> Initially it ran fine but now it runs for about 3-5 minutes sputters then
> dies. It cranks fine but won't start. Seems to be getting spark but no
> fuel. Installed a brand new fuel filter with the engine rebuild. After
> sitting for 15-20 minutes it will start again but will die again in 3-5
> minutes.
>
> The engine is turned. Full tank of fresh gasoline.
>
> I'm stumped and really frustrated. Any ideas?
>
> Thanks a lot.
>
> Mike
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|