Careful when spraying POR. IT CAN KILL YOU. It has isocyanates, not pretty.
If spraying, use an air supplied respirator.
----- Original Message -----
From: Steven R. Goss <Steve@AZscholarships.org>
To: oletrucks <oletrucks@autox.team.net>
Sent: Sunday, July 02, 2000 8:45 PM
Subject: [oletrucks] Thanks! and also rust conversion...again :)
> Hi All,
>
> Thanks for all of the info on the turn signals for the 1955 series 2. I
> will be trying to put the parts together for that in the next week or
> so.
>
> Still taking the bed off of my truck. Will be sand blasting and painting
> the frame in the next few weeks. I remember a lot of discussion about
> what to use for paint. Since I will not be able to get to all the rust I
> was thinking that POR 15 would probably be the best bang for the buck.
>
> Like to here some of the experiences from some of the folks that went
> ahead and bought this.
>
> Does it spray easy?
>
> Steve
>
> --
> Steven R. Goss
> Arizona Scholarship Fund
> http://www.Azscholarships.org
> mailto:Steve@Azscholarships.org
>
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|