Mark,
These measurements are approximent as the hole area is raised on the 4 speed
plate.
Front of plate to front of hole 3-1/2"
Drivers side of plate to drivers side of hole 6-1/2"
Lenght of shifter 25"
Hope this helps.
John Dorsey
Wauchula, FL
'49 Chevy 3800 panel
'52 GMC 640 Firetruck
Mark Self wrote:
> I guess my question wasn't very clear. I want my interior to appear as
> nearly stock as possible. So the question is:
>
> Any of you guys with original manual floor shifts, what are the measurements
> for the hole in your transmission cover (distance from the front of the
> trans cover to center of shifter hole and distance from drivers side of
> trans cover to center of hole)? Also how long is the stock floor shift
> lever?
>
> Thanks in advance
> ====================
> Mark Self
> Redlands, CA
> '55 1st 5-window 3100
> "Sentimental Journey"
> ====================
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|