There's no substitute for cubic inches! Especially if plan an automatic and
A/C you will appreciate the additonal grunt of the 261. Parts availability
and rebuild cost are essentially the same. Check Inliners site for
important differences in head torque pattern for the 261 (even with 235
head).
Jack / Winter Park FL
----- Original Message -----
From: "Brad Newman" <bkn6@airmail.net>
To: "oletrucks" <oletrucks@autox.team.net>
Sent: Tuesday, April 18, 2000 1:11 AM
Subject: [oletrucks] 261 vs 235
> I have an opportunity to purchase 2 good 261's, and one "parts" 261,
> from a local source for $50. One of the engines has an 848 head, and
> both run but need to be rebuilt. On the other hand, I just bought (for
> $25) a 54 model 235 at a swap meet this past weekend. Here's the
> question:
>
> Is there really that big of a difference in these engines? What about
> parts availability? I plan on installing AC this summer, and an
> automatic tranny; would one be better than the other? And finally, what
> about installation? I know that the 235 needs a short shaft water pump,
> but what about the 261? Is it an easy swap?
> What's ya'lls vote ............... 235 or 261?
> Thanks
> Brad
> 49 3100 (stock)
> 54 3100 convertible street project
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|