Paul,
I just placed the door assembly on a solid surface and I think I used a
hammer and something else like a dull chisel or piece of steel to bend out
the tabs. The mechanism is very straightforward.
Terry Stellman
1949 3600
Missouri City, Texas
> -----Original Message-----
> From: Hudson29@aol.com [SMTP:Hudson29@aol.com]
> Sent: Thursday, December 09, 1999 5:19 PM
> To: old-chevy-truck@onelist.com; oletrucks@autox.team.net
> Subject: [oletrucks] AD Inside Door Remote
>
> Has anyone taken the remote door handle assembly apart to change the
> spring? It looks like a simple operation, but getting the folded metal
> tabs
> bent back without breaking them off could be tricky. Is the mechanism
> straightforward?
>
> Paul O'Neil, Hudson29@aol.com
> 1951 Chevrolet 3600 Pickup Project, See it at:
> The Poor Man's Advanced Design Tech Tips Page
> http://home.earthlink.net/~conntest47/
> Fullerton, California USA
> AEROMARK - Need Rubber Stamps or Signs? See:
> http://www.aeromark.net
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|