oletrucks
[Top] [All Lists]

Re: [oletrucks] starter changover

To: arobs@becker.u.washington.edu, oletrucks@autox.team.net
Subject: Re: [oletrucks] starter changover
From: Passnb4U@aol.com
Date: Wed, 8 Dec 1999 02:16:05 EST
In a message dated 12/7/99 9:30:07 PM Pacific Standard Time, 
arobs@becker.u.washington.edu writes:

> Switching to solenoid starting also leaves an unused hole in the toeboard.
>  I'm considering retaining the pedal and part of the linkage to fill this
>  hole and maintain the original appearance.  A non-functioning starter
>  pedal (or one that activates the horn) would confuse even a thief who does
>  know what a starter pedal is for :)
>  
>  Andrew Roberts
>  1949 3600


  then you could switch over to a new steering column, have a key in the 
column, one in the dash, a pedal on the floor, and then hide a few more 
cutoff switches in the glove box...man, the possibilities are endless :)

Mike
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>