With my very limited knowledge of electronics, I knew resistors were
measured in ohms
but diodes were designed to only allow voltage to pass through one way
ac/dc?
can anyone clarify this for me? thanks,,,,,,don.
----- Original Message -----
From: Perry Smith <perigrinefalcon@netscape.net>
To: <oletrucks@autox.team.net>
Sent: Thursday, November 18, 1999 2:40 PM
Subject: [oletrucks] ballast resistor
> Hi all
> I have solved the problem. /Found a company here in phoenix that sell and
> services DC power supply systems. When I explained my problem he went to
the
> spare parts bins and set me up with a doide rated at 50 ohms and the
mounted
> in on a heatsink that I was able to mount on the firewall. It works just
> great. When I asked how much he just said nothing. So the problem is
solved so
> I can continue to drive James while collecting the parts needed for the
> rest"rod"ation. Thanks to everyone for the advice.
>
> Perry Smith
> '58 GMC Fleetside
> Phoenix, Arizona
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|