In a message dated 11/10/99 9:09:43 AM Pacific Standard Time, AKAMF@aol.com
writes:
> Hi All,
> Looked in the archives, my printed copies and the list archives but
couldn't
>
> find what I was looking for. I need a new lower hose for my 55/2nd 3/4 ton
> stock 235. I was sure someone posted a part no. of a molded hose that
would
> work. I don't want to use a flex and I spent about an hour going through
the
>
> hoses as the parts store looking for something close. Anybody got a Part
no?
>
> Another question. I found out that my dipstick reads full when I have
about
>
> 7 quarts of oil in the pan.(I have been driving around that way for about
a
> year, no wonder I had leaks). I remember replacing the tube that the
> dipstick slides in a long time ago. I must have misread the instructions,
> because it needed to be trimmed to a certain length. If someone with a 235
> could measure the length of the tube sticking out of the engine, I'd
> appreciate it.
> Thanks
> Brian (akamf@aol.com)
> 55/2nd 3600 (leaking radiator hose)
> 57 GMC 4X4 (not running)
NAPA carries the upper and lower hose's for my '59 1/2 ton w/235, should be
the same as yours, sorry, don't have the P/N.
Also, probably easier to remark the dipstick too, my truck's at my folks
place or I'd take a look for you.
Mike
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|