As your ohm meter reads so shall the gas gage. It should go smoothly from about
0 to 30 ohms. Sounds like you got a bad sending unit.
Grant 50 3100
Charles Culver wrote:
> Is there any way to check a sending unit, and if it isn't registering
> correctly, can it be calibrated?
>
> Mine shows either full (any position above empty), and empty (when all the
> way at the bottom). There is no in between. I've checked all connections,
> grounds etc, and am sure that this must be a faulty sending unit. Also
> hooked the sending unit up to my ohm meter, and got the same results: All
> or nothing, no in between.
>
> I bought the unit new from Chevy Duty, so I imagine they'll replace it if
> it's defective, but don't want to send it back if I can do something to get
> it working. Thanks!
>
> Smokey
> '50 3600 5-window
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|