Look for a set screw that might have loosened and fell to the floor. They can
be about very small. Look on the under side of the mechanism to see if there is
a small threaded hole.
good luck
gonzo,
tr-250
tr-6
----- Original Message -----
From: "William Cummings" <wildbillbart2@yahoo.com>
To: "North Bay British Car Club" <nobbc@autox.team.net>
Sent: Monday, October 12, 2009 4:31:36 PM GMT -08:00 US/Canada Pacific
Subject: [Nobbc] Ignition Switch
Ok here goes-
I have a '73 MGB and curiously in turning off and removing the key the whole
ignition switch barrel came with it. Putting it back in still starts the car
but obviously there must be a locking ring or something that holds it in. The
diagram in my "The Complete Official MGB 1962-1974" really doesn't show much.
The same with Moss and other sources. What's up and how do you solve this
problem?
Thanks,
Bill Cummings
'73 MGB
--- On Thu, 10/8/09, Ron Engelhardt <nobbc@sonic.net> wrote:
From: Ron Engelhardt <nobbc@sonic.net>
Subject: [Nobbc] Ride Reminder
To: nobbc@autox.team.net
Date: Thursday, October 8, 2009, 11:52 PM
We will meet at 10 AM this coming Saturday 10/10 at 10AM in the Bad Ass Coffee
parking lot, corner of Old Redwood Hwy and Mark West Springs Rd.
Ron
58 MGA
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc
_______________________________________________
Nobbc mailing list
Nobbc@autox.team.net
http://autox.team.net/mailman/listinfo/nobbc
|