morgans
[Top] [All Lists]

Re: 4/4 Zenith carbs

To: "John T. Blair" <jblair@exis.net>, <morgans@autox.team.net>
Subject: Re: 4/4 Zenith carbs
From: "Greg Solow" <Gregmogdoc@surfnetusa.com>
Date: Thu, 21 Sep 2000 20:14:22 -0700
The Morgan 4/4 GT models had a Weber DCD 28-36 two barrel progressive
opening carb with mechanically operated 2ndary throat.  They used a standard
Ford GT inlet manifold and a special tubular exhaust header that Morgan had
made for the car and that was available from the factory up until around 10
years ago.  I don't think that they are supplied any longer.  The cam  and
compression ratios were also different.  The rated output was 83 hp.

Regards,

Greg Solow
----- Original Message -----
From: "John T. Blair" <jblair@exis.net>
To: <morgans@autox.team.net>
Sent: Thursday, September 21, 2000 4:26 PM
Subject: 4/4 Zenith carbs


> I'm pretty sure the 4/4 Series Vs came with the 1500 Kent (Cortina) eng.
and
> used the Zenith VN2 carb.  At least mine did.  I also know that most 4/4
> owners have replace the carb with a weber.  So I have a couple of
questions:
>
> 1. Other than the Cortina, what else used the VN2 carb (especially in the
US)?
>    I've spent several hours searching the net for some sort of Zenith
catalog
>    to no avail.  And really haven't found much info on the VN2.  I know
Ted
>    Schumacher (tedtsimx@q1.net  http://www.tsimportedautomotive.com
>    Phone: 800/ 543-6648 (US & Canada)) has carb kits.
>
> 2. What webber have most of the 4/4 owners put on their cars?  Don't know
>    that I'll do it, but it would be nice to know.  I think I have a webber
>    and manafold at my dad's.
>
> TIA
>
> John
>
> John T. Blair  WA4OHZ          email:  jblair@exis.net
> Va. Beach, Va                  Phone:  (757) 495-8229
>
> 48 TR1800    48 #4 Midget  65 Morgan 4/4 Series V
>      75 Bricklin SV1   77 Spitfire     71 Saab Sonett III
>
> Morgan:    www.team.net/www/morgan
> Bricklin:  www.bricklin.org


<Prev in Thread] Current Thread [Next in Thread>