> I am reassembling a 1951 flat rad and am missing the part that the radiator
> sits on. I believe it is a shelf type of affair that fits between the two "T"
> shaped brackets that bolt on to the front subframe. Does anyone have the
> dimensions, material, or other specifications for this part?
>
> BTW, I am also building a new body tub and have been using brass screws. They
> do seem to break off in the hole, if it is not drilled out enough. However,
> with the appropriate pre-drilling I have had good results with the screws
> holding tight. I also have wondered about gluing the joints, but have not
> decided yet.
>
> Thanks,
>
> Rick Williams
> '51 Plus 4
> #P2234
>
>
Rick -
Check the Registry and find some of the others with a '51 or so model - Fred
Birbeck in Australia might be able to help you...
Tony
--
http://www.gcnd.net/morganville
ldmcjr@zebra.net
|