This sounds like a good material with or in place of the damp-coarse
(sp?) that goes between the body and the frame. Any comment?
TrmpetDave@aol.com wrote:
>
> For the person who asked about what to put under the aluminum straps on the
> rear deck of the +8, I just had an inspiration: marine bedding compound. It
> is a waterproof putty-like material that is meant to be applied under items
> to be screwed down to the deck of a boat. It is semisolid, and oozes into
> nooks and crannies under the cleat, stanchion, etc to be affixed, and then
> hardens somewhat, but never becomes brittle. It keeps water, both salt and
> fresh, out, perventing rust and dry rot, and would probably work quite well
> on a Morgan. Dave Collins, San Diego
--
"Entropy Happens!"
Michael D. Miles, PE Consulting Design Engineer
(503) 292-1234, FAX: (503) 292-1105
email: mdmiles@home.com
http://www.mdmpe.com/
|