In this metric country of Canada, we still refer to a 2x4 as such. It should
be a 50x100mm but it's been a long time since we've seen one that's actually
2" x 4", so that'll throw off the conversion. It's probably closer to 38mm x
88mm in reality. I hope this doesn't start the US vs Imperial ounce thread
again!
Cheers,
Fred Kuzyk
My Morgan site
http://members.xoom.com/msccc/
Holy Smokes & Southern Ontario Cigar Society site
http://members.xoom.com/holysmokes/
-----Original Message-----
From: CHarris990@aol.com <CHarris990@aol.com>
To: nogera@prodigy.net <nogera@prodigy.net>; Morgans@autox.team.net
<Morgans@autox.team.net>
Date: Monday, May 24, 1999 9:34 AM
Subject: Re: Bent Chassis cures
>In a message dated 5/24/99 8:15:25 AM Central Daylight Time,
>nogera@prodigy.net writes:
>
><< I placed a 2X4 Stud ( What do Metric countries call a 2x4 ?
> ) on the rear cross frame and door header >>
>50X100
>Harris
>
|