RE: Stainless Trims

[Ray Rudzki <ray@millicom.clara.net>]

Dear Gary,

Thanks for your kind words,
Stainless Crossmember Trims:

To fit:

We use some silicon sealant, spread lightly onto the top of 
the crossmember - only..no where else or it won't come off.
Allow it to set - normally 12-24 hrs..

The floorboard putty style sealant - seam sealer non setting - is fitted by the 
factory, we use silicon sealant when refitting floors,


Rgds

Melvyn