> -----Original Message-----
> From: deemi@juno.com [SMTP:deemi@juno.com]
> Sent: Monday, October 27, 1997 9:59 AM
> To: morgans@autox.team.net
> Subject: Upper Cross Axle Brace
>
> Does anyone have original type drawings of the Upper Cross Axle Brace,
> our Morgan Super Sports has these tubes that go from the frame to the
> top
> of the front suspension, and we are trying to find more on what they
> were
> put on for. We do know our car raced, and that this term was used on
> her building notes at the factory.
>
> Any help appreciated, she also had a 2 degree negative camber. Car
> #5381
> Best Regards,
> Cameron, Lori and Bob Bowie of Maine
> P.O. Box 3751
> Brewer, Maine 04412
> deemi@juno.com
>
[Blair, John]
Are you talking about the diag. braces on the front
subframe that goes across the front of the car from the lower bar to the
upper bar? If so there is an short explination of how to check
them for in the article on the Morgan Web page, "It's what's up front
that counts".
If you are talking about a bar going from the top bar rearward
to the chassis, this is NOT common on a Morgan. However, Fred Sesson
discusses them in his book.
John
|