At 11:07 AM 2/15/97 -0800, Larry Guzin wrote:
> Any advice on torque wrench setting for the wheel nuts for an '88 +8
> with alloy wheels, other than following bearded adages, such as
> "tight plus 1/4 turn" or "tight but not a dying strain"?
Larry
The usual spec for most lug nuts is from about 50 to 85 ft-lb of
torque.
John
John T. Blair WA4OHZ email: jblair@exis.net
Va. Beach, Va Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V
75 Bricklin SV1 77 Spitfire
The one with the most toys, wins!
|