Re: Resto Tips .....

[Roland Dudley <cobra@cdc.hp.com>]

> >To check the bolt pattern in the head against the new headers, place aluminum
> >foil over the exhaust ports then feel through the foil for the exhaust ports
> >then feel through the foil for the bolt holes.  this leaves a dimple in the
> >foil.  Remove the foil, and there's your bolt pattern!
> >
> >
> >--joe ferrero
> >
> John T. Blair  WA4OHZ          email:  jblair@exis.net

Lead flashing works too and is less flimsy.

Roland