> I cannot see how custom made pillow blocks would be against the rules.
> You would have to make sure that they are properly secured and that the
> driveshaft are guarded.
>
> Mark Hagedorn
> Western Washington University
> Vehicle Research Institute
> Program Assistant
> 360-650-3045
> mark_hagedorn@hotmail.com
> http://vri.etec.wwu.edu/minibaja/index.html
>
> ----- Original Message -----
> From: "Jon Laicovsky" <jon@laicovsky.com>
> To: "mini-baja list" <mini-baja@autox.team.net>
> Sent: Wednesday, December 08, 2004 6:35 AM
> Subject: mini-baja bearing question
>
>
>>I would like to know if using custom made pillow blocks are against SAE
>> mini-baja regulations. I need to use bearings on custom pillow blocks to
>> support two 1" driveshafts.
>>
>> Thanks
>>
>> Jon Laicovsky
>> Rowan University Mini-Baja
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mini-baja
|