mini-baja
[Top] [All Lists]

Re: Pipe thichness!!

To: mini-baja@autox.team.net
Subject: Re: Pipe thichness!!
From: Jade7773@aol.com
Date: Fri, 19 Mar 2004 12:35:53 -0500
Actually, if I recall correctly, the MIN. wall thickness is .040.  However 
there is no such tubing size..BUT...if you could get a foundry to produce a 
limited batch, you could save some weight ;-)

.049 isnt very difficult to weld, especially with MIG, as long as there is a 
tight fit between the components.

Nick
Cal Poly SLO

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mini-baja


<Prev in Thread] Current Thread [Next in Thread>