The high missalignment spacers can give up to 60 degrees total movement
depending on size. You
can find them here:
http://www.kartek.com/products/all/heims/heims.htm
Or
http://www.bakerprecision.com/
Or
http://www.offroadwarehouse.com/
Usually ball joints will give more movement, but not in all cases. I agree
with the other post
that Moog ball joints are good.
Ian
> Hey guys, I got a set of front knuckles off of a cannondale four wheeler and
> need some ball joint advice. I see two options. One is to get the stock type
> of ball joint which has a taper to fit in the knuckle. I hear that some
> automobile ball joints can fit? But you need to modify the knuckle. Any idea
> what the specs are for these "auto parts store" ball joints are and which
> car they are from? The other option is use auorra bearings ball joints(rod
> ends) and get some special high missalignment bushings that effectivly
> reduce the hole size in the ball. Does anyone know where to get these
> bushings?
>
>
>
> With our a-arms we need about 55 degrees or more of missalignment. I think.
>
>
>
>
>
> Chris
__________________________________
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mini-baja
|