Jason,
I don't know of a way to plot a line directly but you can use a Design Table
from Excel to plot it out.
Make an aray of as many points as you would like along the x-axis, dimension
all of them in the y, and then go "Insert" "Design Table" and depending on
the version of Solid works that you have you can auto create and it will
insert all of your dimensions from the sketch into your table. You can also
name your dimensions so they make sense to you if desired. You can then
change the profile from the Design Table or vice versa. Put your
calculations on a second sheet and then reference those cell for the Design
Table.
Good Luck,
Mark Hayes
University of Utah
_________________________________________________________________
Fretting that your Hotmail account may expire because you forgot to sign in
enough? Get Hotmail Extra Storage today!
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mini-baja
|