--===============6380761442998572369==
boundary="=====================_193328359==.ALT"
--=====================_193328359==.ALT
No. They both use the same clutch slave cylinder. Threads are 3/8-24-UNF.
At 05:02 PM 7/8/2019, dave via Mgs wrote:
>....
>Can anyone verify that
> * The threads for an MGA slave cylinder bleed valve are 7/16 x 20
> * The threads for an MGB slave cylinder bleed valve are 3/8 x 24
>Thank you
--=====================_193328359==.ALT
<html>
<body>
No. They both use the same clutch slave cylinder. Threads are
3/8-24-UNF.<br><br>
<br>
At 05:02 PM 7/8/2019, dave via Mgs wrote:<br>
<blockquote type=cite class=cite cite="">....<br>
Can anyone verify that
<ol>
<li>The threads for an MGA slave cylinder bleed valve are 7/16 x 20
<li>The threads for an MGB slave cylinder bleed valve are 3/8 x 24
</ol>Thank you</blockquote></body>
</html>
--=====================_193328359==.ALT--
--===============6380761442998572369==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/pipermail/mgs http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
--===============6380761442998572369==--
|