Moss #435-335, Seal, Filter Head to Block. You'll need the copper
washer for the bolt too.  I had to dig the old one out of the grooveÂ
with an ice pick. Tip: Don't over tighten the bolt. You can crack the
filter head easily.
CR
On 2/2/2019 7:49 PM, Thomas Gunderson via Mgs wrote:
> My filter mount seems to be leaking. I have read there is an o ring between
> the block and the filter mount. I can not find a part number. Can anyone help
> me?
> Sent from my iPhone X
>
>
>
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/mgs
>
> Unsubscribe: http://autox.team.net/mailman/options/mgs/charley38@twc.com
>
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/mgs
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|