Rule #1: If it is an aftermarket part, do not count on it being standard.
Rule #2: When you have a question about the aftermarket part, ask the vendor.
Rule #3: If the vendor will not answer your tech question, or the
part comes without installation instructions, send it back for a
refund (as it is unusable).
Rule #4: If you have a question about MGA check the web site:
http://MGAguru.com
Now if you were installing a vintage original Radiomobile antenna,
you may find the installation instructions here:
http://mgaguru.com/mgtech/accessories/at112b.htm
(and the hole for the antenna is 7/8-inch dimeter).
Banrey Gaylord
1058 MGA with an attitude
http://MGAguru.com
At 09:17 PM 6/2/2016 -0400, James Schulte via Mgs wrote:
>....
>I am trying to install a Moss retractable antenna in my 74.5 BGT. I
>need to know how big a hole I should drill in the left (driver side) fender.
>....
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|