No, just the ignition.
It may match the build sheet, but I don't know.
On Nov 29, 2013 8:14 PM, "Charley & Peggy Robinson" <ccrobins@ktc.com>
wrote:
> Does your key open the trunk & doors?
>
> CR
> On 11/29/2013 7:10 PM, Andrew Lundgren wrote:
>
>> The ignition lock in my '70 B has failed. It wasn't turning nicely for
>> quite some time. I had to hold it all the way on and wiggle it to get it
>> to start for the past few months. Finally, the wiggling trick wouldn't
>> work anymore. I took it apart today expecting to have to replace the
>> switch. After doing so with a spare I had I found it would still not work.
>>
>> I turned the switch manually and it started up with no problem. I put
>> the spare switch in the spare lock assembly I have and it started up
>> without any problem. So, I pulled off my ignition lock and put the spare
>> lock and switch in. Everything is working fine now. The shaft that comes
>> though the lock must not be in the right place any longer.
>>
>> However, I do not want to change the key in the car. I don't know that
>> the ignition key is the original, but I also don't have any reason to
>> believe it is not. (I don't know how may owners had it before me.)
>>
>> It is feasible to have the ignition lock rebuilt? Are the rebuild parts
>> available? (I am not inclined to do this one myself.)
>>
>> Thanks!
>> --
>> Andrew
>> _______________________________________________
>>
>> Mgs@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/mgs/ccrobins@ktc.com
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|