If the thrust fall out you might well need a new block.
Sent from my iPhone
On Apr 22, 2013, at 11:38, Mark J Bradakis <mark@bradakis.com> wrote:
> One problem with the 1500 motor is the crank thrust washers. Once they
wear
> too much they tend to fall out into the oil pan. The best check is to have
someone
> push in the clutch pedal a few times with the motor running while you
closely watch
> the front pulley. If pushing the clutch in moves the pulley forward, you
may need
> an engine rebuild.
>
> mjb.
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/mgs/richard.ewald@gmail.com
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|