See here:
http://mgaguru.com/mgtech/ignition/ig108.htm
http://mgaguru.com/mgtech/ignition/ig106.htm
http://mgaguru.com/mgtech/ignition/ig106a.htm
http://mgaguru.com/mgtech/ignition/ignition.htm
At 11:07 AM 11/19/2012 -0500, Bill Hoss (WLHoss@aol.com) wrote:
>....
>.... I've removed what old gas was in the tank and replaced the
>fuel filters and a kinked section of gas line and I seem to have
>good gas flow to the carburetors (pressure gauge set on two). The
>dash pots have oil and the choke is working properly.
>
>It appears the points are gapped correctly and are opening
>and closing. Can someone explain or point me to something on line
>that shows how to check for spark - preferably without getting the bit?
>....
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|