Re: [Mgs] Reconditioning /cleaning carbs

[Charley & Peggy Robinson <ccrobins@ktc.com>]

Here's the stuff I used to use when I was running a shop.

  
http://www.motionindustries.com/motion3/jsp/mii/viewItemDetailsMI.jsp?AM_ACTION=ViewItemDetailsAM&LANGUAGE=0&AM_FIRST=Y&LINE_NO=12&SR_LINE_NO=11&SEARCH_DESC=03060716&SEARCH_FIELD=M&MFR_PART_NO=14104+TYME+CARB+CLEANER&BUS_ACTION=details&display_option=N&KeepThis=true&TB_iframe=true&height=500&width=600

Take the carbs apart and put every part that you're going to reuse in 
the bath basket overnight.  Pull out the basket and rinse the parts in 
warm water next day.

I once put this stuff into a  competitor's parts cleaner bucket because 
I could only find a refill can of the Tyme.  The next day the bucket was 
leaking at the seams!

CR


On 10/29/2012 11:32 AM, James Schulte wrote:
> Folks,I received a carb care package from John E today and want to get started
> cleaning them to prepare for rebuild. I was thinking of using brake cleaner
> spray to get rid of grime. Is this ok or should I use Simple Green, WD 40 or
> some other cleaner to wipe them down inside and out? Any suggestions?
>
> Jim Schulte
> President Lehigh Valley Kayak & Canoe Club
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/ccrobins@ktc.com
_______________________________________________

Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net