Thanks all for the responses.
Cheers,
Dave
On Sep 7, 2012, at 12:39 PM, Max Heim wrote:
> I'm pretty sure I used the nylon bushing on my 66 B, and it wasn't a
> tremendous hassle. I can't really recall the details, though.
>
> --
>
> Max Heim
> '66 MGB GHN3L76149
> If you're near Menlo Park, CA,
> it's the primer red one with chrome wires
>
> on 9/6/12 7:15 PM, W. David Houser at mgs4dave@tampabay.rr.com wrote:
>
>> Listers,
>> Has anyone replaced this bearing at the top of the steering column between
the
>> outer and inner shafts of their early MGB?
>> I was hoping to remove the top bolt from the steering universal, pull out
the
>> top inner shaft and then remove the old bushing and replace the new one to
>> take up the play I have there. Then hopefully replace the inner shaft. Is
>> there another/easier way to go about this? I haven't found a thing online
or
>> in any of the collection of MGB books that I have.
>> TIA,
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/mgs/mgs4dave@tampabay.rr.com
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/mgs/mgs-archive@autox.team.net
|