Re: [Mgs] soldering corroded copper

["PaulHunt73" <paulhunt73@virginmedia.com>]

The thing is that the spades are riveted to the fuse holder so that as the 
wiring as attached and removed the spades can swivel a bit without twisting 
the fuseholder part.  They could have made the recess for the spades a 
closer tolerance so they couldn't swivel, but they didn't.

PaulH.

----- Original Message ----- 
> Once the block was dry I applied some solder to each rivet to ensure a
> good contact with the tabs 
_______________________________________________

Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: 
http://autox.team.net/mailman/options/mgs/mgs-archive@autox.team.net