Correct link for the cam degreeing instruction set is:
http://cranecams.com/uploads/instructions/803.pdf (387-KB file)
Crane Cams was bought up by a motorcycle parts maker. The Crane
manufacturing equipmamt was moved to a different facility, and the
machinery is back in business making the same parts with the same
machine operators.
Download catalog here: http://cranecams.com/catalog.php (5.8-MB file)
MG cams are on page 264
Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
At 05:21 PM 12/29/2011 -0500, Chris Moog wrote:
>I think Crane went belly up. But Google had the following link
>(that still works). Have fun
>
>www.crane*cams*.com/uploads/instructions/803.pdf
>
>
>On 12/29/2011 3:36 PM, otis15 at aol.com wrote:
>> Does anyone know of a good site for dwelling in a new cam. I
>>had a good one from Crane Cams but it won't open anymore.
>> Thanks
>>
>> Steve
>>_______________________________________________
>>
>>Mgs at autox.team.net
>>Donate: http://www.team.net/donate.html
>>Suggested annual donation $12.75
>>Archive: http://www.team.net/archive
>>Forums: http://www.team.net/forums
>>Unsubscribe: http://autox.team.net/mailman/options/mgs/cgmoog at optonline.net
>_______________________________________________
>
>Mgs at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/mgs/barneymg at mgaguru.com
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2012.0.1901 / Virus Database: 2109/4710 - Release Date: 12/29/11
|