Shound be screwed to the firewall between the fuse box and TS relay
box on the 1500. See here: http://mgaguru.com/mgtech/electric/pics/wipe02.jpg
If it is an aftermarket flasher unit with no screw tab, you might
find it lying behind the heater box. Look for a short round can with
three wires conncted, Green, Green/browN, and Light Green. Some
aftermarket flashers have onlt two terminals, in which case maybe the
pilot light does not work.
At 01:10 PM 9/18/2011 -0400, Dave Willner (davewillner) wrote:
>I've never had to replace the flasher unit before in the MG, but the
>blinkers stopped working today. I did replace the rubber gaskets for
>the front turn signals this morning before the drive but didn't play
>with any wires? The fuses are all good... I would have thought it
>would be near either the relay or the fuse box, but I don't see it
>anywhere. Can anyone tell where its located? ....
|
