What I've seen in the shop is -
Actual flare fittings (hard line to caliper, rear union, etc.) - 7/16" wrench.
Thread 3/8x24 . Pretty regular.
Hoses - again 3/8x24 thread. Wrench size could be 9/16, 14mm, 15mm, or 5/8"
Bleeder screws - What a cornucopia! recently I've seen 7mm, 8mm, 5/16", 7/16"
3/8" and an E-Type with a 1/4-28 bolt (but that's beside the point.)
Glenn
----- Original Message -----
>I'd like to get a flare nut wrench for the hydraulic lines on my '71 MGB. What
>size are the fittings?
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|