Take the valve cover off. When both valves on No. 4 cylinder are open, No.
1 cylinder is at TDC firing (or close to it, use the timing marks on the
pulley for exact measurement).
Richard
On 29 March 2011 17:52, David B. Hammond <dbh@hamengr.com> wrote:
> Any help in determining when no 1 is at TDC for ignition timing?
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/mgs/rbgosling@googlemail.com
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|